4.2
System Programming
Description
Selection
Default
Programming
Conditions
Feature Reference
Caller ID Assignment
Enables or disables the Caller ID feature for outside (CO) lines
which have contracted the Caller ID Service by a Central Office.
• Outside (CO) line number: 1 – 3,
• Enable / Disable
All outside (CO) lines – Enable
1.
Enter 900.
Display: CID Assign
2.
Press NEXT.
Display: CO NO?
3.
Enter an outside (CO) line number.
Pressing NEXT also can enter outside (CO) line number 1.
Display example: CO 1:Disable
4.
Keep pressing SELECT until the desired selection is
displayed.
5.
Press STORE.
6.
To program another outside (CO) line, press NEXT or
PREV, or SELECT and enter the desired outside (CO) line
number.
7.
Repeat steps 4 through 6.
8.
Press END.
• To assign all outside (CO) lines to the same selection, press the
in step 3. In this case, the display will show: CO
Section 3, Features
Caller ID
(
= all outside (CO) lines)
:Mixed.
System Programming
900
key
4-127