Doorphone Ringing/Tone Pattern Selection - Panasonic KXTA308 - ANALOG PBX Installation Manual

4.2 System Programming

Doorphone Ringing/Tone Pattern Selection

Description
Single:
Double:
Triple:
S-Double:
Selection
Default
Programming
Conditions
Feature Reference
Assigns an incoming doorphone call ringing pattern for each
doorphone. There are four types of patterns as follows.
1 s
• Doorphone number: 1 – 2,
• Single / Double / Triple / S-Double
All doorphones — Triple
1. Enter 706.
Display: Door Ring Tone
2. Press NEXT.
Display: Door NO?
3. Enter a doorphone number.
Pressing NEXT also can enter doorphone number 1.
Display example: DP-1:Triple
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another doorphone, press NEXT or PREV, or
SELECT and enter the desired doorphone number.
7. Repeat steps 4 through 6.
8. Press END.
• To assign all doorphones to the same selection, press the
step 3. In this case, the display will show: DP- :Mixed.
• PT users will hear the assigned pattern tone instead of ringing.
• The programs [115] "Extension Ringing Pattern Selection" and [423]
"Outside (CO) Line Ringing Pattern Selection" should be considered
when assigning this program.
Section 3, Features
Doorphone Call
( = all doorphones)
System Programming
706
key in
4-111