Panasonic KXTA308 - ANALOG PBX Installation Manual page 273

4.2 System Programming
Description
Selection
Default
Programming
Conditions
Feature Reference
DISA Built-in Auto Attendant
Assigns the DISA built-in auto attendant number. The extension
number can be assigned as a one digit number and used as a DISA
built-in auto attendant number.
• DISA built-in auto attendant (AA) number: 0 – 9
• Jack number: 01 – 08 / Ring Group number: 1 – 8
All numbers — Not stored
1. Enter 501.
Display: DISA Built-In
2. Press NEXT.
Display: AA NO?
3. Enter a DISA built-in auto attendant number.
Pressing NEXT also can enter DISA AA number 0.
Display example: 0:Not Stored
4. Press SELECT until the desired selection is displayed and
enter an extension or ring group number.
To change the current entry, press CLEAR and enter the new
number.
Display example: 0:Jack-01
5. Press STORE.
6. To program another DISA AA number, press NEXT or
PREV, or SELECT and enter the desired DISA AA
number.
7. Repeat steps 4 through 6.
8. Press END.
• To enable this feature, the user must select "With AA" in program
[500] "DISA Incoming Dialing Mode Selection".
• This system can store up to ten programmable DISA built-in auto
attendant numbers.
• If the user would like to use a line access number "9" and/or operator
number "0" in the "With AA" mode, do not assign auto attendant
number(s) which correspond to the line access number and/or operator
number (0 and/or 9).
Section 3, Features
Direct Inward System Access (DISA)
System Programming
501
4-81