Message Waiting For Another Extension - Panasonic KXTA308 - ANALOG PBX Installation Manual

618

Message Waiting for Another Extension

Description
Selection
Default
Programming
Condition
Feature Reference
4-108 System Programming
4.2
Enables or disables performing the Message Waiting for Another
Extension feature.
If disabled, an extension user cannot assign the Another Extension
Message Waiting button.
• Jack number: 01 – 08,
• Disable / Enable
All jacks – Enable
1. Enter 618.
Display: Another MW Set
2. Press NEXT.
Display: Jack NO?
3. Enter a jack number.
Pressing NEXT also can enter jack number 01.
Display example: #01:Enable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and enter the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
• To assign all jacks to the same selection, press the
this case, the display will show: #
Section 3, Features
Message Waiting for Another Extension
System Programming
( = all jacks)
:Mixed.
key in step 3. In