Using Proprietary Telephones; Viewing The Display - Panasonic KXTA308 - ANALOG PBX Installation Manual

4.1.1

Using Proprietary Telephones

Viewing the Display

Before entering the programming mode
Entering the programming mode
Note
4-4 System Programming
The display gives the user helpful information, such as the next
step, previous entries, etc.
The KX-TA30830 utilizes one information line for programming.
The display capacity is 16 digits. If the entry is longer than
16 digits, the user can shift the display by pressing the
button.
Before entering the programming mode, confirm that:
• The telephone is on-hook.
• No calls are on hold at your telephone.
1. Press the PROGRAM button.
The display shows: PITS-PGM NO?
2. Dial #.
The display shows: Password:
3. Enter the system password (default 1234).
The display shows the initial system programming
message: SYS-PGM NO?
• The entered system password is not shown on the display. The system
password can be changed by system programming. Refer to Section 4.2
[002] "System Password".
• During the programming mode, the extension is treated as a busy
extension.
or