Do Not Disturb Override - Panasonic KXTA308 - ANALOG PBX Installation Manual

4.2 System Programming
Description
Selection
Default
Programming
Condition
Feature Reference

Do Not Disturb Override

Enables or disables performing the Do Not Disturb (DND)
Override feature.
• Jack number: 01 – 08,
• Disable / Enable
All jacks – Disable
1. Enter 609.
Display: DND Override
2. Press NEXT.
Display: Jack NO?
3. Enter a jack number.
Pressing NEXT also can enter jack number 01.
Display example: #01:Disable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and enter the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
• To assign all jacks to the same selection, press the
this case, the display will show: #
Section 3, Features
Do Not Disturb (DND) Override
( = all jacks)
:Mixed.
System Programming
609
key in step 3. In
4-103