Caller Id Call Routing (Apt/Dpt Integration Only); Caller Id Screening (Apt/Dpt Integration Only) - Panasonic KX-TVM50 Feature Manual

2.2 System Features
2.2.8

Caller ID Call Routing (APT/DPT Integration Only)

Description
Allows the System Administrator to store a maximum of 200 telephone numbers and assign a specific
destination (extension, mailbox, Mailbox Group, or Custom Service) to each telephone number.
When Caller ID information is received that matches one of the stored telephone numbers, the call is
automatically directed to its destination. Calls that are "Private" (when the caller's number is not
received) and "Out of Area" (when the caller is calling from an area that does not support Caller ID)
can also be directed to a specific extension, mailbox or Custom Service.
Conditions
• The Company Greetings will not be played for callers when calls are routed by this feature.
Programming Manual References
2.4.1 Caller ID/DID/PIN Call Routing
2.2.9

Caller ID Screening (APT/DPT Integration Only)

Description
Allows the VPS to announce the name of the caller when transferring a call to an extension from a
preprogrammed caller. (Ex. "You have a call from [name of caller].") Caller names must be recorded
beforehand. Caller names can be recorded by each subscriber (Caller Name Announcement—
Personal) and for the entire VPS (Caller Name Announcement—System).
Conditions
• This feature is only available when "Yes" is set for "Caller ID Screen" in the Class of Service
(COS) settings.
• If the same telephone number is programmed for both the system and personal caller name
announcement, the VPS will announce the personal caller name.
Programming Manual References
"Caller ID Screen" in 2.2.2 Personal Options
Feature Manual References
2.2.10 Caller Name Announcement—Personal (APT/DPT Integration Only)
2.2.11 Caller Name Announcement—System (APT/DPT Integration Only)
3.1.3 Setting Class of Service (COS) Parameters
18 Feature Manual