Caller Id Call Waiting Cas Receive Time - Panasonic KXTA308 - ANALOG PBX Installation Manual

4.2 System Programming

Caller ID Call Waiting CAS Receive Time

Description
Selection
Default
Programming
Condition
Feature Reference
The telephone company calls the system "Customer Premise
Equipment (CPE)". If you have a Caller ID Call Waiting during a
conversation, the telephone company will send to the CPE a CAS
(CPE Alerting Signal). If the CAS duration is too long or too short,
the CAS is ignored. If the CAS is accepted, then the system will
respond and the Caller ID Call Waiting feature will be performed.
This program assigns the allowable CAS duration. Normally, it
should not be necessary to change the default setting.
Mode 1 (40 ms through 120 ms) / Mode 2 (64 ms through 96 ms) /
•
Mode 3 (72 ms through 96 ms)
Mode 3
1. Enter 914.
Display: C.W CID Receive
2. Press NEXT.
Display example: MODE 3
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
• This program is available when "Enable" is assigned in programs [900]
"Caller ID Assignment" and [913] "Caller ID Call Waiting
Assignment".
Section 3, Features
Caller ID Call Waiting
System Programming
914
4-137