Panasonic KXTA308 - ANALOG PBX Installation Manual page 56

2.9 System Data Clear
CAUTION
Notice
Condition
Programming Reference
2-32 Installation
4. Slide the System Clear Switch to the "CLEAR" position.
5. Press the Reset Button.
6. Return the System Clear Switch to the "NORMAL" position
before the power indicator stops flashing.
(The power indicator will flash for about 10 seconds.)
To protect the printed circuit boards (P-boards) from static electricity, do
not touch parts on the P-boards. Before touching the System Clear Switch
and Reset Button, put on a grounding strap.
After pressing the Reset Button, return the System Clear Switch to the
"NORMAL" position in step 6 before the power indicator stops flashing.
Otherwise, the system will not clear.
• Be sure the frame of the main unit is connected to the ground. Refer
to Section 2.2.4 "Frame Ground Connection".
Section 4, System Programming
[999] System Data Clear
System Clear Switch
Reset Button