Panasonic KXTA308 - ANALOG PBX Installation Manual page 283

4.2 System Programming
Description
Selection
Default
Programming
Conditions
Feature Reference
DISA Incoming Assignment
Assigns the extensions which can receive calls via DISA.
• Jack number: 01 – 08,
• Enable / Disable
All jacks — Enable
1. Enter 516.
Display: DISA Assign
2. Press NEXT.
Display: Jack NO?
3. Enter a jack number.
Pressing NEXT also can enter jack number 01.
Display example: #01:Enable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and enter the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
• If a caller attempts to access an extension which is set to
caller will hear a reorder tone and the call will be disconnected.
• If a call via DISA is received by a ring group, this program will not
work for extensions in that ring group. In this case, disabled extensions
will still ring.
• To assign all jacks to the same selection, press the
this case, the display will show: #
Section 3, Features
Direct Inward System Access (DISA)
( =all jacks)
:Mixed.
System Programming
516
" "
Disable , the
key in step 3. In
4-91