Panasonic KXTA308 - ANALOG PBX Installation Manual page 275

4.2 System Programming
Description
Selection
Default
Programming
Conditions
Feature Reference
DISA Busy Mode
Selects the mode when destination extension of the call via DISA is
busy. There are two modes as follows.
Call Waiting: a call waiting tone is sent and then the call is held
until the called party responds.
Disconnect: the call is disconnected after the busy tone.
Call Waiting / Disconnect
Disconnect
1. Enter 506.
Display: DISA Busy Mode
2. Press NEXT.
Display example: Disconnect
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
None
Section 3, Features
Direct Inward System Access (DISA)
System Programming
506
4-83