Call Forwarding To An Outside (Co) Line - Panasonic KXTA308 - ANALOG PBX Installation Manual

4.2 System Programming

Call Forwarding to an Outside (CO) Line

Description
Selection
Default
Programming
Condition
Feature Reference
Enables or disables performing the Call Forwarding to an Outside
(CO) Line feature.
• Jack number: 01 – 08,
• Disable / Enable
All jacks – Disable
1. Enter 607.
Display: CO Forward
2. Press NEXT.
Display: Jack NO?
3. Enter a jack number.
Pressing NEXT also can enter jack number 01.
Display example: #01:Disable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and enter the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
• To assign all jacks to the same selection, press the
this case, the display will show: #
Section 3, Features
Call Forwarding – to an Outside (CO) Line
( = all jacks)
:Mixed.
System Programming
607
key in step 3. In
4-101