Standard Multiline Features
Account Code Entry
For bookkeeping purposes, account codes may be assigned to
use with certain calls. If you are required to use account codes
for outgoing calls, the code must be entered before you can place
an outgoing call.
See your System Administrator to verify the types
any, for which you must enter an account code.
Account Code Entry - Outgoing Calls
Listen for dial tone, then press
1
Dial the account code.
2
NOTE: If you make a mistake while entering the account
code, press
Listen for dial tone.
3
Dial the outside line access code and listen for dial tone.
4
Dial the telephone number.
5
NOTE: You cannot use the
procedure.
Account Code Entry - Incoming Calls
After completing your conversation, and before you hang up,
1
press
ACCT ENTRY
*
0
again, then the correct account code.
ACCT ENTRY
.
(Continued)
of calls, if
0
.
*
button for this
41