Conferencing - AT&T SYSTEM 25 User Manual

Conferencing

You can set up a conference that includes system 25 stations as
well as outside callers. You can have a maximum of five
conferees; however, no more than two may be on outside lines.
To set up a conference, you can use a
line buttom.
1 Use your DTAC or Selector Console to dial
2 Annouce the conference call.
3 Press
4 Use your DTAC or Selector Console to dial
5
6
7
the first party.
CONFERENCE and listen for dial tone.
The green light next to the button of the held call winks
. .
intermittently.
the second party, or press the line button for
that party.
NOTE: If, for any reason this call should not
be added to the conference (busy, no answer,
or misdial), you should do the following:
a Press the switchhook and then release.
b lf you are reconnected to the first party,
return to step 3 and continue. Otherwise,
return to step 4 and continue.
Announce the conference call.
Press the button next to the winking light
to join the conference parties together.
If you want to add additional conferees,
return to step 3 and continue.
(continued)
or outside
9