Issu—Consolidated Package Upgrade - Cisco ASR1002 - ASR 1002 Router Software Configuration Manual
Asr 1000 series aggregation services routers
Hide thumbs
Also See for ASR1002 - ASR 1002 Router:
- Quick start manual (47 pages) ,
- Installation manual (46 pages) ,
- Configuration manual (34 pages)
Table of Contents
Advertisement
Appendix B
Configuration Examples
R0
R0/0
R0/1
F0
P0
P1
Slot
--------- ------------------- ---------------------------------------
0
R0
F0
The show redundancy states command shows SSO as the operational redundancy mode:
Router# show redundancy states
Redundancy Mode (Operational) = sso
Redundancy Mode (Configured)
Redundancy State
Communications = Up
client count = 66
client_notification_TMR = 30000 milliseconds
ISSU—Consolidated Package Upgrade
In the following example, ISSU is used to upgrade two RPs in the same Cisco ASR 1000 Series Router
to consolidated packages. The RPs are being upgraded from Cisco IOS XE Release 2.1.0, which uses
Cisco IOS Release 12.2(33)XNA, to Cisco IOS XE Release 2.1.1, which uses Cisco IOS Release
12.2(33)XNA1.
The example starts with the user logged into RP 0, the active RP.
Router# show version
Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version
12.2(33)XNA, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 01-May-08 00:29 by mcpre
Cisco IOS-XE software, Copyright (c) 1986-2008 by Cisco Systems, Inc.
All rights reserved.
licensed under the GNU General Public License ("GPL") Version 2.0.
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY.
GPL code under the terms of GPL Version 2.0.
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
OL-16506-11
ASR1000-RP1
ASR1000-ESP10
ASR1004-PWR-AC
ASR1004-PWR-AC
CPLD Version
07091401
07062111
07051680
my state = 13 -ACTIVE
peer state = 8
-STANDBY HOT
Mode = Duplex
Unit ID = 48
Maintenance Mode = Disabled
Manual Swact = enabled
RF debug mask = 0x0
Certain components of Cisco IOS-XE software are
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
ok
00:29:34
ok, active
00:29:34
ok, standby
00:27:49
ok, active
00:29:34
ok
00:28:47
ok
00:28:47
Firmware Version
12.2(33r)XN2
12.2(33r)XN2
12.2(33r)XN2
= sso
= sso
You can redistribute and/or modify such
For more details, see the
ISSU—Consolidated Package Upgrade
The
B-19
Advertisement
Table of Contents
Troubleshooting
