Cisco ASR1002 - ASR 1002 Router Software Configuration Manual page 384

Configuring Frame Relay DLCI-to-ATM AAL5SNAP Bridged Interworking
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
Router(config)# no ip domain lookup
Step 4
mpls label range minimum-value maximum-value [static
minimum-static-value maximum-static-value]
Example:
Router(config)# mpls label range 101 4000 static
4001 5001
Step 5
mpls label protocol ldp
Example:
Router(config)# mpls label protocol ldp
Step 6
mpls ip default-route
Example:
Router(config)# mpls ip default-route
Step 7
mpls ldp graceful-restart
Example:
Router(config)# mpls ldp graceful-restart
Step 8
xconnect logging pseudowire status
Example:
Router(config)# xconnect logging pseudowire status
Step 9
pseudowire-class [pw-class-name]
Example:
Router(config)# pseudowire-class atm-fr-bridged
Step 10
encapsulation mpls
Example:
Router(config-pw-class)# encapsulation mpls
Step 11
interworking ethernet
Example:
Router(config-pw-class)# interworking ethernet
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
8
Purpose
Enables the privileged EXEC mode.
Enter your password, if prompted.
Enters the global configuration mode.
Disables the IP domain naming system (DNS).
Configures the range of local labels available for use
with Multiprotocol Label Switching (MPLS)
applications on packet interfaces.
Specifies label distribution protocol (LDP) for the
ATM-PE router.
Enables the distribution of labels associated with the
IP default route.
Enables MPLS LDP graceful restart.
Enables system logging (syslog) reporting of
pseudowire status events.
Establishes a pseudowire class with a name that you
specify, and enters the pseudowire class
configuration mode.
Enables MPLS encapsulation on the interface.
Enables the L2VPN Ethernet interworking feature.
Configuring MPLS Layer 2 VPNs