Cisco ASR1002 - ASR 1002 Router Software Configuration Manual page 272

How to Configure Call Home
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Router# configure terminal
Step 2
call-home
Example:
Router(config)# call-home
Step 3
copy profile source-profile target-profile
Example:
Router(cfg-call-home)# copy profile profile1
profile2
Renaming a Destination Profile
To change the name of an existing profile, complete the following steps:
SUMMARY STEPS
1.
2.
3.
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
16
configure terminal
call-home
rename profile source-profile target-profile
Purpose
Enters global configuration mode.
Enters call home configuration mode.
Creates a new destination profile with the same
configuration settings as the existing destination profile,
where:
• source-profile—Specifies the existing name of the
profile.
target-profile—Specifies a name for the new copy of
•
the profile.
Configuring Call Home