Configuring Contact Information; Example - Cisco ASR1002 - ASR 1002 Router Software Configuration Manual

Configuring Call Home
Command or Action
Step 9
subscribe-to-alert-group inventory [periodic {daily
hh:mm | monthly date hh:mm | weekly day hh:mm}]

Example:

Router(cfg-call-home-profile)# subscribe-to-alert-group
inventory periodic monthly 1 12:00
Step 10
subscribe-to-alert-group syslog
[severity {catastrophic | critical | debugging |
disaster | fatal | major | minor | normal |
notification | warning}][pattern string]
Example:
Router(cfg-call-home-profile)# subscribe-to-alert-group
syslog
Step 11
exit
Example:
Router(cfg-call-home-profile)# exit

Configuring Contact Information

Each router must include a contact e-mail address. You can optionally include a phone number, street
address, contract ID, customer ID, and site ID.
To assign the contact information, complete the following steps:
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
configure terminal
call-home
contact-email-addr email-address
phone-number +phone-number
street-address street-address
customer-id text
site-id text
contract-id text
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
How to Configure Call Home
Purpose
Subscribes this destination profile to the Inventory
alert group, with an optional periodic value.
Subscribes this destination profile to the Syslog
alert group, with an optional severity level. You
can specify a pattern to be matched in the syslog
message, up to a maximum of five patterns per
profile. If the pattern contains spaces, you must
enclose it within double quotation marks (" ").
Exits call home destination profile configuration
mode.
21