Cisco ASR1002 - ASR 1002 Router Software Configuration Manual page 102

ISSU Upgrade for Redundant Platforms
Command or Action
Step 16
redundancy force-switchover
Example:
Router# redundancy force-switchover
Step 17
request platform software package clean
Example:
Router# request platform software package clean
Examples
The following example shows ISSU upgrade using subpackages on a Cisco ASR 1006 router or ASR
1013 router with a dual RP setup using the issu command set
Router# show version
Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version
12.2(33)XNA, RELEASE SOFTWARE (fc1)
<output removed for brevity>
System image file is "bootflash:packages.conf"
<output removed for brevity>
Router# show platform
Chassis type: ASR1006
Slot
--------- ------------------- --------------------- -----------------
0
0/0
0/1
0/2
0/3
1
1/0
1/1
1/3
R0
R1
F0
F1
P0
P1
Slot
--------- ------------------- ---------------------------------------
0
1
R0
R1
F0
F1
Router# show version r0 installed
Package: Provisioning File, version: n/a, status: active
File: bootflash:packages.conf, on: RP0
Built: n/a, by: n/a
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
20
Type State
ASR1000-SIP10 ok
SPA-4XT-SERIAL ok
SPA-5X1GE-V2 ok
SPA-2XOC3-POS ok
SPA-4XT-SERIAL ok
ASR1000-SIP10 ok
SPA-4X1FE-TX-V2 ok
SPA-2X1GE-V2 ok
SPA-1XOC12-POS ok
ASR1000-RP1 ok, active
ASR1000-RP1 ok, standby
ASR1000-ESP10 ok, active
ASR1000-ESP10 ok, standby
ASR1006-PWR-AC ok
ASR1006-FAN ok
CPLD Version Firmware Version
07091401 12.2(33r)XNB
07091401 12.2(33r)XNB
07062111 12.2(33r)XNB
07062111 12.2(33r)XNB
07091401 12.2(33r)XNB
07091401 12.2(33r)XNB
Purpose
Force an RP switchover to complete the upgrade.
(Optional) Removes all unused subpackages files from the
router.
Insert time (ago)
00:03:03
00:01:35
00:01:35
00:01:36
00:01:35
00:03:03
00:01:36
00:01:35
00:01:36
00:03:03
00:03:03
00:03:03
00:03:03
00:02:07
00:02:07
Software Upgrade Process