Chapter 3
3.5 FIXING SYSTEM
3.5.1 Fixing Pressure Roller
3.5.1.1 Removing the Cassette
1) Remove the cassette by holding the cassette handle.
3.5.1.2 Removing the Front
Cover
1) Open the front cover [1], and free the claw [2] of the
arm to separate.
2) Remove the left/right shaft [3], and detach the front
cover.
[1]
[3]
F-3-137
3.5.1.3 Removing the Rear
Cover
1) Open the face-up cover [1], and remove the left/
right shaft [2]; then, detach the face-up cover.
3-36
0002-3720
0002-3722
[2]
0002-3724
[1]
[2]
F-3-138
2) Shift down the left/right fixing pressure release
lever [1] to release the pressure.
3) Remove the 2 screws [2].
4) Free the 2 claws [3] at the bottom; then, slide the
rear cover [4] to the rear to detach.
[1]
[2]
[3]
F-3-139
3.5.1.4
Removing the Top
Cover
1) Open the front cover. (This step may be skipped if
the front cover has already been removed.)
2) Free the 2 claws [1], and detach the top cover [2].
[4]
0002-3726