Removing The Left Cover; Removing The Gear Unit; Main Motor; Removing The Cassette - Canon LBP3200 - LBP 3200 B/W Laser Printer Service Manual

Chapter 3
[1]
[4]
F-3-95
3.4.4.6 Removing the Left
Cover
1) Remove the screw [1].
2) Free the claw [2] at the rear; then, free the claw [4]
at the front bottom as by sliding the bottom of the
left cover [3] to the front.
3) While opening the bottom of the left cover [3]
slightly toward the outside, slide upward to detach
the left cover.
[3]
[2]
[4]
F-3-96

3.4.4.7 Removing the Gear Unit

1) Remove the 2 screws [1], and detach the drive plate
(small) [2].
3-26
[3]
[2]
0002-3694
[1]
0002-3695
[1]
F-3-97
2) Remove the 2 gears [1].
3) While freeing the claw, detach the gear unit [2].
[2]
[1]
F-3-98

3.4.5 Main Motor

3.4.5.1 Removing the Cassette

1) Remove the cassette by holding the cassette handle.
3.4.5.2 Removing the Front
Cover
1) Open the front cover [1], and free the claw [2] of the
arm to separate.
2) Remove the left/right shaft [3], and detach the front
cover.
[2]
0002-3755
0002-3761