Chapter 3
controller board, and free the cable from the cable
clamp.
4) Disconnect the connector [2] of the power supply
board.
5) Remove the left/right pressure spring and
grounding spring [3].
6) Remove the left/right pressure plate [4].
[4]
[3]
[2]
[3]
F-3-145
7) While holding the left/right frame [2] of the fixing
film unit [1], life it at an angle to detach the fixing
film unit.
[2]
[1]
F-3-146
3.5.1.8 Removing the Fixing
Pressure Roller
1) Remove the gear [1] while freeing the claw.
2) Remove the boss of the bushing [2], and turn it to
detach the bushing.
3-38
[1]
0002-3733
[2]
[1]
F-3-147
3) Lift the shorter shaft [2] of the fixing pressure roller
[1] at an angle to detach it from the bushing; then,
slide it to detach the fixing pressure roller.
[1]
F-3-148
3.5.2 Fixing Film Unit
3.5.2.1 Removing the Cassette
1) Remove the cassette by holding the cassette handle.
3.5.2.2 Removing the Front
Cover
1) Open the front cover [1], and free the claw [2] of the
arm to separate.
2) Remove the left/right shaft [3], and detach the front
cover.
[2]
0002-3719
0002-3721