Removing The Left Cover; Removing The Power Supply Shield Plate; Removing The Power Supply Assembly - Canon LBP3200 - LBP 3200 B/W Laser Printer Service Manual

Chapter 3
[1]
[4]
F-3-103
3.4.5.6 Removing the Left
Cover
1) Remove the screw [1].
2) Free the claw [2] at the rear; then, free the claw [4]
at the front bottom as by sliding the bottom of the
left cover [3] to the front.
3) While opening the bottom of the left cover [3]
slightly toward the outside, slide upward to detach
the left cover.
[3]
[2]
[4]
F-3-104
3.4.5.7 Removing the Power
Supply Shield Plate
1) Remove the 5 screws [1], and detach the power
supply shield plate [2].
3-28
[3]
[2]
0002-3771
[1]
0002-3774
[1]
[2]
F-3-105
3.4.5.8 Removing the Power
Supply Assembly
1) Remove the 3 screws [1].
2) Disconnect the 4 connectors [2], and free the flat
cable [3] of the engine controller board.
[2]
[1]
[1]
F-3-106
3) Push down the front of the power supply assembly
[2] while feeding the left/right boss [2]; then, slide
it out to detach.
[1]
[2]
F-3-107
[1]
0002-3779
[3]