Removing The Power Supply Assembly; Removing The Top Sensor; Delivery Sensor - Canon LBP3200 - LBP 3200 B/W Laser Printer Service Manual

[1]
[2]
F-3-51
3.1.10.8 Removing the Power
Supply Assembly
1) Remove the 3 screws [1].
2) Disconnect the 4 connectors [2], and free the flat
cable [3] of the engine controller board.
[2]
[1]
[1]
F-3-52
3) Push down the front of the power supply assembly
[2] while feeding the left/right boss [2]; then, slide
it out to detach.
[1]
[2]
F-3-53
[1]
0002-3778
[3]
3.1.10.9 Removing the Top
Sensor
1) Shift down the main unit so that its front faces down
(i.e., the inside of the main unit is in view).
2) Disconnect the connector [1] of the engine
controller board, and free the cable from the cable
guide.
3) Removing the screw [2], and detach the top sensor.
[2]
[3]
F-3-54

3.1.11 Delivery sensor

3.1.11.1 Removing the Cassette
1) Remove the cassette by holding the cassette handle.
3.1.11.2 Removing the Rear
Cover
1) Open the face-up cover [1], and remove the left/
right shaft [2]; then, detach the face-up cover.
[1]
[2]
F-3-55
Chapter 3
0002-3781
[1]
0002-3759
0002-3764
3-13