High-Voltage Board - Canon LBP3200 - LBP 3200 B/W Laser Printer Service Manual

[3]
[2]
[4]
F-3-25
3.1.7.7 Removing the Power
Supply Shield Plate
1) Remove the 5 screws [1], and detach the power
supply shield plate [2].
[1]
[2]
F-3-26
3.1.7.8 Removing the Power
Supply Assembly
1) Remove the 3 screws [1].
2) Disconnect the 4 connectors [2], and free the flat
cable [3] of the engine controller board.
[2]
[1]
[1]
F-3-27
[1]
0002-3746
[1]
0002-3747
[3]
3) Push down the front of the power supply assembly
[2] while feeding the left/right boss [2]; then, slide
it out to detach.
[1]
[2]
F-3-28
3.1.7.9 Removing the Power
Supply Board
1) Remove the flat cable [1].
2) Remove the 4 screws [2], and detach the power
supply board [3].
[1]
[3]
[2]
[2]
F-3-29

3.1.8 High-voltage board

3.1.8.1 Removing the Cassette
1) Remove the cassette by holding the cassette handle.
3.1.8.2 Removing the Front
Cover
1) Open the front cover [1], and free the claw [2] of the
arm to separate.
2) Remove the left/right shaft [3], and detach the front
Chapter 3
0002-3748
0002-3734
0002-3737
3-7