Removing The Right Cover; Removing The Left Cover; Removing The Fixing Film Unit - Canon LBP3200 - LBP 3200 B/W Laser Printer Service Manual

[1]
[2]
F-3-140
3.5.1.5 Removing the Right
Cover
1) Remove the screw [1].
2) Free the claw [2] at the rear; then, free the claw [4]
at the front bottom as by sliding the bottom of the
right cover [3] to the front.
3) While opening the bottom of the right cover [3]
slightly toward the outside, slide upward to detach
the right cover.
[1]
[4]
F-3-141
3.5.1.6
Removing the Left
Cover
1) Remove the screw [1].
2) Free the claw [2] at the rear; then, free the claw [4]
at the front bottom as by sliding the bottom of the
left cover [3] to the front.
3) While opening the bottom of the left cover [3]
slightly toward the outside, slide upward to detach
the left cover.
0002-3728
[3]
[2]
0002-3730
[3]
[2]
[4]
F-3-142
3.5.1.7 Removing the Fixing
Film Unit
1) Remove the 2 screws [1], and detach the fixing
cover.
[1]
[2]
F-3-143
2) Remove the 2 screws [1], and detach the fixing
entrance guide [2] by sliding it to the left and right.
[1]
[2]
F-3-144
3) Disconnect the connector [1] of the engine
Chapter 3
[1]
0002-3732
3-37