Removing The Pickup Solenoid; Cassette Separation Pad; Removing The Separation Pad; Fixing System - Canon LBP3250 Series Service Manual

Chapter 3
4) Remove the rear cover. (page 3-1)Reference[Removing the Rear Cover]
5) Remove the main controller PCB. (page 3-8)Reference[Removing the
Main Controller PCB]
6) Remove the separation pad. (page 3-16)Reference[Removing the Sepa-
ration Pad]
7) Remove the pickup unit. (page 3-14)Reference[Removing the Pickup
Unit]

3.4.3.2 Removing the Pickup Solenoid

1) Free the solenoid harness [1] from the harness guide [2].
[1]
2) Remove the screw [1] and move the solenoid arm [2] in the direction of
arrow [A] to remove the pickup solenoid [3].
[2]
[A]

3.4.4 Cassette Separation Pad

3.4.4.1 Removing the Separation Pad

1) Remove the separation pad [1].
- 2 screws [2]
- 2 hooks [3]
[2]
[1]
[3]
3-16
[2]
F-3-54
[1]
[3]
F-3-55
F-3-56

3.5 FIXING SYSTEM

3.5.1 Fixing Unit

3.5.1.1 Before Removing the Fixing Unit

1) Remove the upper cover. (page 3-2)Reference[Removing the Upper
Cover]
2) Remove the left cover. (page 3-1)Reference[Removing the Left Cover]
0019-8393
3) Remove the right cover. (page 3-1)Reference[Removing the Right Cov-
er]
4) Remove the rear cover. (page 3-1)Reference[Removing the Rear Cover]
5) Remove the main controller PCB. (page 3-8)Reference[Removing the
Main Controller PCB]

3.5.1.2 Removing the Fixing Unit

1) Remove the rear inner cover [1].
- 1 screw [2]
- 2 claws [3]
[2]
2) Remove the terminal [1] and free the harness [3] from the harness guide
[2].
0019-8472
3) Disconnect the 4 connectors [1].
4) Free the harness [3] from the harness guide [2].
5) Free the fixing harness [5] from the harness holder [4].
[1]
[3]
F-3-57
[3] [2]
[1]
F-3-58
0019-8410
0019-8411