Removing The Rear Cover; Removing The Top Cover; Removing The Right Cover - Canon LBP3200 - LBP 3200 B/W Laser Printer Service Manual

[1]
[3]
F-3-149
3.5.2.3 Removing the Rear
Cover
1) Open the face-up cover [1], and remove the left/
right shaft [2]; then, detach the face-up cover.
[1]
[2]
F-3-150
2) Shift down the left/right fixing pressure release
lever [1] to release the pressure.
3) Remove the 2 screws [2].
4) Free the 2 claws [3] at the bottom; then, slide the
rear cover [4] to the rear to detach.
[2]
0002-3723
[1]
[2]
[3]
F-3-151
3.5.2.4 Removing the Top
Cover
1) Open the front cover. (This step may be skipped if
the front cover has already been removed.)
2) Free the 2 claws [1], and detach the top cover [2].
[1]
[2]
F-3-152
3.5.2.5 Removing the Right
Cover
1) Remove the screw [1].
2) Free the claw [2] at the rear; then, free the claw [4]
at the front bottom as by sliding the bottom of the
right cover [3] to the front.
3) While opening the bottom of the right cover [3]
slightly toward the outside, slide upward to detach
the right cover.
Chapter 3
[4]
0002-3725
0002-3727
3-39