Removing The Right Cover; Removing The Left Cover; Removing The Gear Unit; Removing The Tooth-Missing Gear - Canon LBP3200 - LBP 3200 B/W Laser Printer Service Manual

Chapter 3
[1]
[2]
F-3-70
3.4.1.5 Removing the Right
Cover
1) Remove the screw [1].
2) Free the claw [2] at the rear; then, free the claw [4]
at the front bottom as by sliding the bottom of the
right cover [3] to the front.
3) While opening the bottom of the right cover [3]
slightly toward the outside, slide upward to detach
the right cover.
[1]
[4]
F-3-71
3.4.1.6
Removing the Left
Cover
1) Remove the screw [1].
2) Free the claw [2] at the rear; then, free the claw [4]
at the front bottom as by sliding the bottom of the
left cover [3] to the front.
3) While opening the bottom of the left cover [3]
slightly toward the outside, slide upward to detach
the left cover.
3-20
0002-3524
[3]
[2]
0002-3526
[3]
[2]
[4]
F-3-72

3.4.1.7 Removing the Gear Unit

1) Remove the 2 screws [1], and detach the drive plate
(small) [2].
[1]
F-3-73
2) Remove the 2 gears [1].
3) While freeing the claw, detach the gear unit [2].
[2]
[1]
F-3-74
3.4.1.8 Removing the Tooth-
Missing Gear
1) Remove the 2 screws [1], and detach the gear
support [2].
[1]
0002-3533
[2]
0002-3548