Table of Contents
Advertisement
Left Cassette Cover]
6) Detach the front cover. (page 3-5)Reference [Removing the Front
Cover]
7) Remove the ETB unit. (page 3-26)Rerefence [Removing the ETB Unit]
3.5.9.2 Removing the Duplexing Feed Motor
LBP5100
1) Detach the cover [1].
- 2 claws [2]
2) Remove the duplexing feed motor [1].
- 1 connector [2]
- 2 screws [3]
3.6 FIXING SYSTEM
3.6.1 Fixing Assembly
3.6.1.1 Preparation for Removing the Fixing Assembly
LBP5100
1) Remove the delivery tray. (page 3-7)Reference [Removing the Delivery
Tray]
2) Detach the rear cover. (page 3-2)Reference [Removing the Rear Cover]
3) Detach the right cover. (page 3-2)Reference [Removing the Right Cover
/ Right Cassette Cover]
4) Detach the upper cover. (page 3-5)Reference [Removing the Upper
Cover]
5) Detach the left cover. (page 3-4)Reference [Removing the Left Cover /
Left Cassette Cover]
6) Detach the face-down cover. (page 3-7)Reference [Removing the Face-
Down Cover]
3.6.1.2 Removing the Fixing Assembly
LBP5100
Be sure to turn off the power switch and disconnect the power code before
replacing the fixing assembly.
As the fixing assembly right after the use of the host machine is subject to a
high temperature, be sure to leave it for sufficient period of time to cool
down after turning off the power and then remove.
1) Disconnect the 4 connectors [1].
F-3-240
F-3-241
0015-7612
2) Remove the cable.
- 2 wire saddles [1]
- 1 reuse band [2]
3) Remove the plate [1].
- 2 screws [2]
4) Disconnect the 3 connectors [1].
0015-7597
5) Remove the fixing assembly [1].
- 3 screws [2]
0015-7598
Chapter 3
F-3-242
F-3-243
F-3-244
F-3-245
F-3-246
3-35
Advertisement
Table of Contents
