[3]
[2]
[4]
F-3-43
3.1.9.5 Removing the CAPT
Board
1) Removing the flat cable [1].
2) Remove the 3 screws [2], and detach the CAPT
board [3].
[1]
[2]
F-3-44
3.1.10 Top sensor
3.1.10.1 Removing the Cassette
1) Remove the cassette by holding the cassette handle.
3.1.10.2 Removing the Front
Cover
1) Open the front cover [1], and free the claw [2] of the
arm to separate.
2) Remove the left/right shaft [3], and detach the front
cover.
[1]
0002-3596
[3]
0002-3757
0002-3760
[1]
[3]
F-3-45
3.1.10.3 Removing the Rear
Cover
1) Open the face-up cover [1], and remove the left/
right shaft [2]; then, detach the face-up cover.
[1]
[2]
F-3-46
2) Shift down the left/right fixing pressure release
lever [1] to release the pressure.
3) Remove the 2 screws [2].
4) Free the 2 claws [3] at the bottom; then, slide the
rear cover [4] to the rear to detach.
Chapter 3
[2]
0002-3763
3-11