Chapter 3
[1]
[2]
F-3-87
3.4.3.8 Removing the Power
Supply Assembly
1) Remove the 3 screws [1].
2) Disconnect the 4 connectors [2], and free the flat
cable [3] of the engine controller board.
[2]
[1]
[1]
F-3-88
3) Push down the front of the power supply assembly
[2] while feeding the left/right boss [2]; then, slide
it out to detach.
[1]
[2]
F-3-89
3-24
[1]
0002-3753
[3]
3.4.3.9 Removing the Cassette
Pickup Solenoid
1) Shift down the main unit so that its front faces down
(i.e., the inside of the main unit is in view).
2) Disconnect the connector [1] of the engine
controller board and free the cable from the cable
guide.
3) Remove the screw [2], and detach the cassette
pickup solenoid [3] (rear of the main motor).
[3]
[2]
F-3-90
3.4.4 Gear Unit
3.4.4.1 Removing the Cassette
1) Remove the cassette by holding the cassette handle.
3.4.4.2 Removing the Front
Cover
1) Open the front cover [1], and free the claw [2] of the
arm to separate.
2) Remove the left/right shaft [3], and detach the front
cover.
0002-3754
[1]
0002-3688
0002-3689