Removing The Cassette; Removing The Top Cover; Removing The Left Cover; Removing The Power Supply Shield Plate - Canon LBP3200 - LBP 3200 B/W Laser Printer Service Manual

Chapter 3
2) Shift down the left/right fixing pressure release
lever [1] to release the pressure.
3) Remove the 2 screws [2].
4) Free the 2 claws [3] at the bottom; then, slide the
rear cover [4] to the rear to detach.
[1]
[2]
[3]
F-3-56
3.1.11.3 Removing the Top
Cover
1) Open the front cover. (This step may be skipped if
the front cover has already been removed.)
2) Free the 2 claws [1], and detach the top cover [2].
[1]
[2]
F-3-57
3.1.11.4 Removing the Left
Cover
1) Remove the screw [1].
2) Free the claw [2] at the rear; then, free the claw [4]
at the front bottom as by sliding the bottom of the
left cover [3] to the front.
3) While opening the bottom of the left cover [3]
slightly toward the outside, slide upward to detach
the left cover.
3-14
[4]
0002-3765
0002-3773
[3]
[2]
[4]
F-3-58
3.1.11.5 Removing the Power
Supply Shield Plate
1) Remove the 5 screws [1], and detach the power
supply shield plate [2].
[1]
[2]
F-3-59
3.1.11.6
Removing
Delivery Sensor
1) Disconnect the connector [1] of the engine
controller board, and free the cable from the cable
guide.
2) Remove the screw [2], and detach the delivery
sensor [3].
[1]
0002-3776
[1]
the
0002-3777