Removing The Power Supply Shield Plate; Removing The Power Supply Assembly; Removing The Manual Pickup Solenoid - Canon LBP3200 - LBP 3200 B/W Laser Printer Service Manual

Chapter 3
[2]
[1]
F-3-131
2) Remove the spring [1].
3) While freeing the claw, detach the tooth-missing
gear [2].
[2]
[1]
F-3-132
3.4.7.9 Removing the Power
Supply Shield Plate
1) Remove the 5 screws [1], and detach the power
supply shield plate [2].
[1]
[2]
F-3-133
3.4.7.10 Removing the Power
Supply Assembly
1) Remove the 3 screws [1].
2) Disconnect the 4 connectors [2], and free the flat
3-34
0002-6262
[1]
0002-6263
cable [3] of the engine controller board.
[2]
[1]
[1]
F-3-134
3) Push down the front of the power supply assembly
[2] while feeding the left/right boss [2]; then, slide
it out to detach.
[1]
[2]
F-3-135
3.4.7.11 Removing the Manual
Pickup Solenoid
1) Shift down the main unit so that its front faces down
(i.e., the inside of the main unit is in view).
2) Free the cable [1] front the cable guide.
3) Remove the screw [2], and detach the manual
pickup solenoid [3].
[3]
0002-6265