Installing The Tinnerman Clips - HP StorageWorks 2/32 - SAN Switch Installation Manual
San switch 2/32 version 4.0.x installation guide
Hide thumbs
Also See for StorageWorks 2/32 - SAN Switch:
- Installation manual (100 pages) ,
- Release note (62 pages) ,
- Administrator's manual (447 pages)
Table of Contents
Advertisement
Installing the SAN Switch 2/32
Figure 9: Installing the Tinnerman clips
5. Assemble the outer rails by completing the following steps:
42
a. As an aid in assembly, two rubber washers have been included to help
keep the rear slotted portion of the outer rail flush against the rear rail-tray
brackets. Install them as shown in
b. Insert the alignment pins attached to the outer rail front flange into the
center opening in the rack.
SHR-2582A
Figure
10.
SAN Switch 2/32 Installation Guide
Advertisement
Table of Contents
