Installing The Mounting Brackets - HP StorageWorks 2/32 - SAN Switch Installation Manual
San switch 2/32 version 4.0.x installation guide
Hide thumbs
Also See for StorageWorks 2/32 - SAN Switch:
- Installation manual (100 pages) ,
- Release note (62 pages) ,
- Administrator's manual (447 pages)
Table of Contents
Advertisement
2. Choose a mounting location in the rack for the switch.
3. Install each of the two mounting brackets with (1) M5 Torx head screw with
Figure 8: Installing the mounting brackets
4. Install (2) M5 U-type Tinnerman clips for each of the front columns of the
SAN Switch 2/32 Installation Guide
captive lock washers as shown in
rack in the top and bottom positions of the three-hole EIA pattern as shown in
Figure
9.
Installing the SAN Switch 2/32
Figure
8.
SHR-2581A
41
Advertisement
Table of Contents
