Chapter 2 Hardware Overview - EnGenius ENH200 User Manual

Chapter 2
Hardware Overview
The following figures show the key components on the ENH200.
2.1 Bottom View
The bottom panel of the ENH200 contains two RJ‐45 ports, a PoE interface, and a Reset button. A
removable cover covers these components.
‐ The RJ‐45 port connects to an Ethernet adapter in a computer you use to configure the ENH200.
For more information, see Chapter 4.
‐ The PoE interface allows the ENH200 to be powered using the supplied PoE injector.
‐ The Reset button can be used to reboot the ENH200 and return the device to its default factory
configuration, erasing any overrides you may have made to the device's default settings. The
Reset button is recessed to prevent accidental resets. To reboot the ENH200, use a flat object
such as a pencil to press the Reset button for approximately 10 seconds and then stop pressing
the Reset button.
2.2 Back Panel
The back panel of the ENH200 contains the LED indicators that show the link quality and status of the
ENH200.