Hardware Overview - EnGenius EWS850-FIT Quick Start Manual

Hardware Overview

Bottom Cover
(Aluminum
Die-Casting)
LAN- 2.5 Gigabit Ethernet Port
(802.3at PoE)
Reset Button:
Reset to default: Press and hold the reset button on the PoE adaptor for over 60 seconds, and the LED (PWR)
will start Fast Flashing (0.2 sec). Then, the device will be reset to factory default settings.
LEDs
STATUS
Connecting to the management
(FitXpress/FitController)
Management Connected
(FitXpress/FitController/Standalone)
LAN Connected
LAN Transmitting
2.4GHz Radio On
2.4GHz Transmitting
5GHz Radio On
5GHz Transmitting
Firmware Upgrading
Reset to Default
AP Location Mode
Mounting
Holes
LED COLOR
PWR (Orange)
PWR (Orange)
LAN (1G)
LAN (1G)
2.4GHz (Green)
2.4GHz (Green)
5GHz (Green)
5GHz (Green)
PWR LAN
PWR (Orange)
PWR LAN
Detachable Antennas
(SMA Type)
Top Cover
(UL Certified Plastic)
LAN (2.5G)
LAN (2.5G)
2.4GHz 5GHz
Flashing (1.5 Sec. on ->0.5 Sec. off)
2.4GHz 5GHz
LED
Indicaters
LED BEHAVIOR
Flashing (0.5 Sec.)
Solid On
Solid On
Flashing
Solid On
Flashing
Solid On
Flashing
Flashing (0.5 Sec.)
Fast Flashing
EWS850-FIT Quick Start Guide