Chapter 2
Hardware Overview
The following figures show the key components on the OM2P‐LC/OM2P‐HS.
2.1 Bottom V i ew
The bottom panel of the OM2P‐LC/OM2P‐HS contains two RJ‐45 ports, a PoE interface, and a Reset
button. A
removable cover covers these components.
‐ The RJ‐45 port connects to an Ethernet adapter in a computer you use to configure the OM2P‐
LC/OM2P‐HS. For more information, see Chapter 4.
‐ The PoE interface allows the OM2P‐LC/OM2P‐HS to be powered using the supplied PoE injector.
‐ The Reset button can be used to reboot the OM2P‐LC/OM2P‐HS and return the device to its
default factory configuration, erasing any overrides you may have made to the device's default
settings. The Reset button is recessed to prevent accidental resets. To reboot the OM2P‐
LC/OM2P‐HS, use a flat object such as a pencil to press the Reset button for approximately 10
seconds and then stop pressing the Reset button.
2.2 Back Panel
The back panel of the OM2P‐LC/OM2P‐HS contains the LED indicators that show the link quality and
status of the
OM2P‐LC/OM2P‐HS.