Spanning Tree Settings - EnGenius ENH200 User Manual

9.2 Spanning Tree Settings

Spanning Tree Status
Bridge Hello Time
Bridge Max Age
Bridge Forward Delay
Priority
Accept / Cancel
Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see
section 4.1).
Enable or disable the ENH200 Spanning Tree function.
Specify Bridge Hello Time, in seconds. This value determine how
often the ENH200 sends hello packets to communicate
information about the topology throughout the entire Bridged
Local Area Network
Specify Bridge Max Age, in seconds. If another bridge in the
spanning tree does not send a hello packet for a long period of
time, it is assumed to be dead.
Specify Bridge Forward Delay, in seconds. Forwarding delay time
is the time spent in each of the Listening and Learning states
before the Forwarding state is entered. This delay is provided so
that when a new bridge comes onto a busy network, it looks at
some traffic before participating.
Specify the Priority number. Smaller number has greater priority.
Click Accept to confirm the changes or Cancel to cancel and
return previous settings.