EnGenius ENH200 User Manual page 42

MAC Address
Mode
Accept / Cancel
1. Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see
section 4.1).
2. The Access Point to which you want to extend wireless connectivity must enter the
ENH200's MAC address into its configuration. For more information, refer to the
documentation for the Access Point. Not all Access Point supports this feature.
Enter the MAC address of the Access Point to which you want to
extend wireless connectivity.
Select Disable or Enable to disable or enable WDS.
Click Accept to confirm the changes or Cancel to cancel and
return previous settings.