Wds Bridge Mode - EnGenius ENH200 User Manual

12.3 WDS Bridge Mode

Use this feature to link multiple Access Points in a network. All clients associated with any
Access Points can communicate with each other in an ad-hoc manner.
WDS Bridge
Step1
Step2
Step3
Step4
Step5
Step6
Step7
Step8
Each WDS bridge device must use the same Subnet, Wireless Mode, Wireless
Channel, and Security Setting.
Log in to the Web Configurator with the default IP address
192.168.1.1
Select your country or region's regulation.
For Operation Mode, select WDS Bridge from System
Properties.
Select the channel you want to use.
Set up the authentication settings
Set up WDS Link Settings.
Specify the MAC address of the Access Point with which you
want to connect.
Click Apply to save all changes.