Client Bridge Mode - EnGenius ENH200 User Manual

Wireless Client
Step1
Step2
Step3
Step4
Access Point Mode does not provide DHCP server, so the Wireless Client IP
address must be configured manually using the same Local Area Network subnet.

12.2 Client Bridge Mode

Client Bridge Mode functions like a wireless dongle. It must connect to an Access Point/AP
Router to join the network.
Refer to Chapter 13 to check the Access Point's configuration.
Client Bridge
Step1
Step2
Step3
Step4
Select the wireless mode with which you want to associate.
Use site survey to scan nearby Access Point and either select the
Access Point to which you want to connect, or enter the SSID
manually.
Configure the VLAN ID in your wireless device if available.
Select the appropriate authentication type and password.
Log in to the Web Configurator with the default IP address
192.168.1.1
Select your country or region's regulation.
For Operation Mode, select Client Bridge from System
Properties.
Use site survey to scan Access Points that are available in
nearby areas.