EnGenius ENH200 User Manual page 13

3.2 Understanding the ENH200 LEDs
The rear of the ENH200 has two groups of LEDs. One group, labeled INDICATORS, shows the status of
the device. The second group, LINK QUALITY, shows the strength of the link between the ENH200
and the network. The following table describes the ENH200 LEDs.
LED Color
Power Green
LAN Green
WLAN Green
Link Quality See Status
column
Mode Status
OFF= ENH200 is not receiving power.
ON= ENH200 is receiving power.
OFF = ENH200 is not connected to the network.
ON = ENH200 is connected to the network, but not sending or
receiving data.
Blink = ENH200 is sending or receiving data.
Access Point OFF = ENH200 radio is off and the device is not
or Client sending or receiving data over the wireless LAN.
Bridge Mode ON = ENH200 radio is on, and the device is not
sending or receiving data over the wireless LAN.
Blink = ENH200 radio is on, and the device is sending
or receiving data over the wireless LAN.
Access Point Shows the strength of the link between the ENH200
or Client and the network.
Bridge Mode G = good quality (green).
Y = medium quality (yellow).
R = poor or no link (red).