Wireless Advanced Settings - EnGenius ENH200 User Manual

8.4 Wireless Advanced Settings

Data Rate
Transmit Power
RTS/CTS Threshold
Distance
Antenna Selection
Short GI
Select a data rate from the drop-down list. The data rate affects
throughput. If you select a low data rate value, for example, the
throughput is reduced but the transmission distance increases.
Lets you increase or decrease transmit power. Higher transmit
power may prevent connections to the network, while the lower
transmit power can prevent clients from connecting to the device.
Specify the threshold package size for RTC/CTS. A small number
causes RTS/CTS packets to be sent more often and consumes
more bandwidth.
Specify the distance between Access Points and clients. Longer
distances may drop high-speed connections.
Specify the internal antenna type.
Sets the time that the receiver waits for RF reflections to settle
out before sampling data. Using a short (400ns) guard interval
can increase throughput, but can also increase error rate in some
installations due to increased sensitivity to radio-frequency