Chapter 12 Network Configuration Examples; Access Point; Acces Point - EnGenius ENH200 User Manual

Chapter 12 Network Configuration Examples

This chapter provides step-by-step descriptions for using the ENH200's operating modes.
The Access Point Mode's default configuration allows the ENH200 to act as a central unit of a
WLAN or as a root device of a wired environment. Repeater mode and Mesh network mode
are reserved for future configuration.

12.1 Access Point

Access Point
Step1
Step2
Step3
Step4
Step5
Step6
Step7
Step8
For more advanced settings, refer to the previous chapters.
Log in to the Web Configurator with your browser by entering the
default IP address 192.168.1.1
Select your country or region's regulation.
Use site survey to scan channels available in nearby areas.
Select channel with less interferences.
Specify the SSID for your broadcast SSID and you can also
configure multiple SSID at the same time.
Verify the VLAN identifier to separate services among clients
Set the authentication settings.
Click Apply to save all changes.