EnGenius ENH200 User Manual page 62

Get Automatically
From ISP
Use These DNS
Servers
Discard Ping on WAN
Accept / Cancel
Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see
section 4.1).
Click this radio button to obtain the DNS automatically from the
DHCP server.
Click the radio button to set up the Primary DNS and Secondary
DNS servers manually.
Check to Enable to recognize pings on the ENH200 WAN
interface or Disable to block pings on the ENH200 WAN
interface. Note: Pinging IP addresses is a common method used
by hackers to test whether the IP address is valid. Blocking pings
provides some extra security from hackers.
Click Accept to confirm the changes or Cancel to cancel and
return previous settings.