11.2 Management VLAN
Click the Management VLAN link under the Management menu to assign a VLAN tag to the
packets. A VLAN is a group of computers on a network whose software has been configured
so that they behave as if they were on a separate Local Area Network (LAN). Computers on
VLAN do not have to be physically located next to one another on the LAN
Management VLAN ID
Accept / Cancel
1. If you reconfigure the Management VLAN ID, you may lose your connection to the
ENH200. Verify that the DHCP server supports the reconfigured VLAN ID and then reconnect
to the ENH200 using the new IP address.
2. Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see
section 4.1).
If your network includes VLANs and if tagged packets need to
pass through the Access Point, enter the VLAN ID. Otherwise,
click No VLAN tag .
Click Accept to confirm the changes or Cancel to cancel and
return previous settings.