Wireless Mode
SSID
Site Survey
Prefer BSSID
WDS Client
Wireless Security
Accept / Cancel
Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see
section 4.1).
Wireless mode supports 802.11b/g/n mixed modes.
Specify the SSID if known. This field is completed automatically if
you select an Access Point in the Site Survey.
Scans nearby locations for Access Points. You can select a
discovered Access Point to establish a connection.
Enter the MAC address if known. If you select an Access Point in
the Site Survey, this field is completed automatically.
Click the appropriate radio button to enable or disable WDS
Client.
See section 8.2 for information.
Click Accept to confirm the changes or Cancel to cancel and
return previous settings.