Chapter 11 Management Settings; Administration - EnGenius ENH200 User Manual

Chapter 11 Management Settings

The Management section lets you configure administration, management VLAN, SNMP
settings, backup/restore settings, firmware upgrade, time settings, and log settings. This
chapter describes these settings.

11.1 Administration

Click the Administration link under the Management menu to change the user name and
password used to log on to the ENH200 Web Configurator . The default user name is admin
and the default password is admin. Changing these settings protects the ENH200
configuration settings from being accessed by unauthorized users.
Name
Password
Confirm Password
Remote Management
Remote Upgrade
Remote Management
Port
Enter a new username for logging in to the Web Configurator.
Enter a new password for logging in to the Web Configurator
Re-enter the new password for confirmation.
Enable or disable remote management.
Specify whether the ENH200 firmware can be upgraded
remotely.
If remote management is enabled, enter the port number to be
used for remote management. For example: If you specify the